Guan L-10 Purpose

Guanze L-10 is a liquid cellulose enzyme produced by microorganisms from non-pathogenic bacteria through fermentation in water. It can remove the hairs protruding on the surface of cellulose fibers, giving the fabric a soft and comfortable feel, with long-lasting effect; it can significantly reduce the fuzzing and balling on the surface of cellulose fabrics, making the fabric have better luster and brighter colors after dyeing.

Characteristics  Benefits

Complete hair removal, clean; minimal damage to fabric strength

Give the fabric a soft and comfortable feel with long-lasting effect; suitable for hair removal of thick and tight fabrics, and polishing and softening of towel fabrics

- Good color retention - Better fabric luster, brighter colors after dyeing

- Widespread application range, and

- Temperature up to 65℃ - High-efficiency system, reliable results, very safe for subsequent dyeing processes

- High concentration, high activity product - Very convenient for treatment and weighing, with high efficiency and good reproducibility

Properties

Chemical composition: Enzyme preparation

Specific gravity at 20℃: Approximately 1 g/cm3

Physical form: Liquid

Storage stability: Stable at 20℃ in a sealed container for 6 months, the product is sensitive at 0℃ and above 30℃.

Toxicity/Environmentally friendly: The storage, operation and use of this product should comply with general hygiene and safety regulations for chemical storage and transportation, and it should not be swallowed. Application

Pre-treatment biological polishing process: After oxygen漂 treatment and water washing, add water and adjust the pH to around 5.0 using acetic acid and sodium acetate. Heat to 55℃， add GAN enzyme L-10 for biological polishing for 20 to 60 minutes → inactivation treatment.

Temperature： The application temperature is 50℃ - 65℃， and the more suitable temperature is 55℃.

pH stability： This product is applicable to pH of 4.5 - 6.0， and the more suitable pH is 5.0.

Practical example：

- Equipment： Overflow / jet dyeing machine.

- GAN enzyme L-10 dosage: 0.5% - 2.0% by weight.

- Bath ratio： 1：5 - 1：20.

- Temperature： Around 55℃.

- pH： Around 5.0.

- Polishing time： 20 - 60 minutes.

- Inactivation： Raise the temperature to 80℃ for 10 minutes. Or add 1 gram per liter of soda ash and heat to 70℃ for 10 minutes. 

DISCLAIMER  The following disclaimer replaces the buyer's documents. The seller makes no express or implied representations or warranties, including the marketing or suitability of the product for a specific purpose. Any statements in this document should not be construed as inducing any patent infringement. The seller is not liable for any loss, breach of warranty, strict liability, infringement or consequences arising from claims related to the product in any circumstances. For any claim for compensation, the sole remedy and the sole liability of the seller is the purchase price of the buyer. The data and results are based on controlled or laboratory work and must be confirmed by the buyer through tests according to the expected usage conditions. This product has not undergone specialized tests for prolonged contact with membranes, skin damage, blood or insertion into the human body. Therefore, it is recommended that these products not be used in such situations.